Author Topic: Welcome to the The Winchester Model 1876 board.  (Read 83315 times)

Offline Grizzly Adams

  • Top Active Citizen
  • *
  • Posts: 1308
  • Liked:
  • Likes Given: 4
Re: Welcome to the The Winchester Model 1876 board.
« Reply #20 on: December 07, 2007, 09:14:03 PM »
Greetings all..I finally have been able to sign on here. Nice to be with such a distinguished group.
I have 5 1/2 &6's   which includes one Uberti 45-60.   The half is in pieces and needs to be restored. Thats a 40-60 round barrel rifle.
I have not been able to work up a load and play with the Uberti too much yet but I have shot my original 45-75 deluxe. Whatta monster

Hi, Art.

Sounds like you have a nice collection there.  Buck Stinson is collecting information on surviving 1876s, and if you have not done so, you might want to provide him with the vitals on your rifles.   Check his post here:
http://www.cascity.com/forumhall/index.php/topic,17799.70.html 

Page 8, about 4 down.
If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
COMNAVFORV, NRA life, SASS Life, TG, STORM Rider #36.
GAF

Offline Big Goose

  • American Plainsmen Society
  • Very Active Citizen
  • *
  • Posts: 68
  • Liked:
  • Likes Given: 4
Re: Welcome to the The Winchester Model 1876 board.
« Reply #21 on: December 08, 2007, 10:04:49 PM »
Here's my Chaparral 45-75 28"barrel
 Big Goose

Offline larryo_1

  • Top Active Citizen
  • *
  • Posts: 396
  • Liked:
  • Likes Given: 0
Re: Welcome to the The Winchester Model 1876 board.
« Reply #22 on: December 11, 2007, 01:42:36 PM »




Well here goes nothing.  Hope it works as it is a good photo.
When in doubt, mumble!
NRA Endowment member

Advertising

  • Guest
Re: Welcome to the The Winchester Model 1876 board.
« Reply #23 on: Today at 03:12:05 AM »

Offline Grizzly Adams

  • Top Active Citizen
  • *
  • Posts: 1308
  • Liked:
  • Likes Given: 4
Re: Welcome to the The Winchester Model 1876 board.
« Reply #23 on: December 11, 2007, 06:49:40 PM »


Well here goes nothing.  Hope it works as it is a good photo.

Nice looking rifle, larry!  Looks like you got this pic posting done pat! :)
If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
COMNAVFORV, NRA life, SASS Life, TG, STORM Rider #36.
GAF

Offline Doc Sorebones

  • Citizen
  • *
  • Posts: 18
  • Liked:
  • Likes Given: 0
Re: Welcome to the The Winchester Model 1876 board.
« Reply #24 on: December 18, 2007, 04:17:09 PM »
Chapparal 45/60 after much money-new wood sights and tlc.

Offline Grizzly Adams

  • Top Active Citizen
  • *
  • Posts: 1308
  • Liked:
  • Likes Given: 4
Re: Welcome to the The Winchester Model 1876 board.
« Reply #25 on: December 18, 2007, 04:28:11 PM »
Chapparal 45/60 after much money-new wood sights and tlc.

Doc, I know it did not come easy, but it looks like you finally have a very nice rifle there.  Great wood. :)
If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
COMNAVFORV, NRA life, SASS Life, TG, STORM Rider #36.
GAF

Offline Doc Sorebones

  • Citizen
  • *
  • Posts: 18
  • Liked:
  • Likes Given: 0
Re: Welcome to the The Winchester Model 1876 board.
« Reply #26 on: December 18, 2007, 05:09:24 PM »
Cheers grizzly,yes a very nice shooter too which is the only reason i have persisted with it.I have won 3 different 200-300 yard competitions with it.At risk of seeming boastful I need to say that I have an Browning 1886 45/70 that was my best long range lever rifle but now is getting stiff competition for first place.Need to point out that the four chapparals i have hade the chance to slug the bores in all have slightly bigger bores than average 45's.needing projectiles sized at .459 for best results.Doc

Offline Grizzly Adams

  • Top Active Citizen
  • *
  • Posts: 1308
  • Liked:
  • Likes Given: 4
Re: Welcome to the The Winchester Model 1876 board.
« Reply #27 on: December 18, 2007, 06:56:35 PM »
Need to point out that the four chapparals i have hade the chance to slug the bores in all have slightly bigger bores than average 45's.needing projectiles sized at .459 for best results.Doc

That's a good piece of information.  Check out Leadhead's thread;

http://www.cascity.com/forumhall/index.php/topic,18104.0.html

Much has been made about which aspects of the Chaparral or Uberti are closest to the original.  FWIW, every single original I have ever heard of has been .457.
If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
COMNAVFORV, NRA life, SASS Life, TG, STORM Rider #36.
GAF

Offline Outlander

  • Citizen
  • *
  • Posts: 13
    • Holiday-Room
  • Liked:
  • Likes Given: 0
Re: Welcome to the The Winchester Model 1876 board.
« Reply #28 on: December 31, 2007, 10:51:32 AM »
Hello,
I have a Chaparral in .45-60, I am very satisfied.  ;D

Nice salute from Germany
Outlander

Offline Grizzly Adams

  • Top Active Citizen
  • *
  • Posts: 1308
  • Liked:
  • Likes Given: 4
Re: Welcome to the The Winchester Model 1876 board.
« Reply #29 on: January 03, 2008, 10:16:26 AM »
Hello,
I have a Chaparral in .45-60, I am very satisfied.  ;D

Nice salute from Germany
Outlander

Welcome to the fire, Outlander. :)  Glad to hear you are pleased with your Chaparral 1876.  Are you reloading your ammunition, or having to purchase it?  How difficult is it to get in Germany? 

If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
COMNAVFORV, NRA life, SASS Life, TG, STORM Rider #36.
GAF

Offline Outlander

  • Citizen
  • *
  • Posts: 13
    • Holiday-Room
  • Liked:
  • Likes Given: 0
Re: Welcome to the The Winchester Model 1876 board.
« Reply #30 on: January 03, 2008, 10:52:05 AM »
Welcome to the fire, Outlander. :)  Glad to hear you are pleased with your Chaparral 1876.  Are you reloading your ammunition, or having to purchase it?  How difficult is it to get in Germany? 

Hy Grizzly Adams,
Thanks for the welcome. I invite my munition itself. Collets have looked at the buffalo ordered arms, and the accessories. In old germany is all so expensive.
We did not enjoy as open to deal with this hobby, the laws are somewhat different than in protecting the promised land (USA)  ;D
I need and search for data, I invite the time
N110 19,0-21,0 grs with 330grs bullet.
Have trail boss, but no dates?
My chaparral is revised, and with others in society scheckering. If I could get data, I would be very happy.

Best Regards,
Can be read, sorry Outlander

Offline Grizzly Adams

  • Top Active Citizen
  • *
  • Posts: 1308
  • Liked:
  • Likes Given: 4
Re: Welcome to the The Winchester Model 1876 board.
« Reply #31 on: January 03, 2008, 02:36:23 PM »
Hy Grizzly Adams,
Thanks for the welcome. I invite my munition itself. Collets have looked at the buffalo ordered arms, and the accessories. In old germany is all so expensive.
We did not enjoy as open to deal with this hobby, the laws are somewhat different than in protecting the promised land (USA)  ;D
I need and search for data, I invite the time
N110 19,0-21,0 grs with 330grs bullet.
Have trail boss, but no dates?
My chaparral is revised, and with others in society scheckering. If I could get data, I would be very happy.

Best Regards,
Can be read, sorry Outlander

Sorry, I have never seen any Trailboss data for the 45-60. 

Have you seen this site?  http://www.chaparralarms.com/specs/calibers.htm


I am not familiar with the Kemira 110 powder, but, IMR 4198 seems to be working well for folks.

Many shooters are having good success with Accurate 5744.  Can you get it in Germany?   
Powder: Accurate - 5744
Bullet:  300-325
Start load: 22.0 grains (1250 – 1350 ft/p/sec)
Maximum load: 26.0 grains (1400 – 1500 Ft/p/sec).

Nice looking checkering on your rifle. :) 





If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
COMNAVFORV, NRA life, SASS Life, TG, STORM Rider #36.
GAF

Offline Llano County

  • Active citizen
  • *
  • Posts: 25
  • Liked:
  • Likes Given: 0
Re: Welcome to the The Winchester Model 1876 board.
« Reply #32 on: January 03, 2008, 10:28:05 PM »
I picked up my new Cimarron 1876 today. OMG! It is beautiful! The wood is great, the color case hardening is great, the bluing is dark and rich. I'm impressed with the quality and workmanship. I can't wait to shoot it. Plus...get this along with the rifle I didn't just receive one, but two free bumper stickers. Actually they are probably the most expensive bumper stickers I own.  ;D
Llano County
Indian Terr. (Oklahoma)
NCOWS No. 1480

Offline Outlander

  • Citizen
  • *
  • Posts: 13
    • Holiday-Room
  • Liked:
  • Likes Given: 0
Re: Welcome to the The Winchester Model 1876 board.
« Reply #33 on: January 04, 2008, 10:01:25 AM »
Sorry, I have never seen any Trailboss data for the 45-60. 
Have you seen this site?  http://www.chaparralarms.com/specs/calibers.htm
I am not familiar with the Kemira 110 powder, but, IMR 4198 seems to be working well for folks.
Many shooters are having good success with Accurate 5744.  Can you get it in Germany?   
Powder: Accurate - 5744
Bullet:  300-325
Start load: 22.0 grains (1250 – 1350 ft/p/sec)
Maximum load: 26.0 grains (1400 – 1500 Ft/p/sec).
Nice looking checkering on your rifle. :) 

Hy,
I think I will buy the powder and taste. It is not a problem for us to get.
Trail boss had only taken because the full sleeve. Grs at 14.0, I thought I shoot an air rifle.
Little pressure, but I had no data, and therefore prefer to ask.
Voted for the schekering (Nussbaum) 400 - € additionally paid. In the march get my dp scharps "boss" in .45-110 and I looked at the ingredients in buffalo ordered arms. I have made paper patch bullets to use. :-\ I hope there are a few recommended's.

Outlander


Offline Raghorn

  • Citizen
  • *
  • Posts: 1
  • Liked:
  • Likes Given: 0
Re: Welcome to the The Winchester Model 1876 board.
« Reply #34 on: February 13, 2008, 10:37:45 PM »
Add me to the group.  28" 45-60, will only be used with cast bullets and black powder or sub.

Offline Grizzly Adams

  • Top Active Citizen
  • *
  • Posts: 1308
  • Liked:
  • Likes Given: 4
Re: Welcome to the The Winchester Model 1876 board.
« Reply #35 on: February 13, 2008, 10:52:49 PM »
Add me to the group.  28" 45-60, will only be used with cast bullets and black powder or sub.

Welcome Raghorn.  Glad to have ya aboard. :)  I have added you to the membership roster here:

http://www.cascity.com/forumhall/index.php/topic,17922.0.html

You might want to give the new Goex Pinnacle sub a try in that 45-60. ;)
If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
COMNAVFORV, NRA life, SASS Life, TG, STORM Rider #36.
GAF

Offline Colonel Buckshot

  • Top Active Citizen
  • *
  • Posts: 111
  • Liked:
  • Likes Given: 0
Re: Welcome to the The Winchester Model 1876 board.
« Reply #36 on: February 18, 2008, 10:37:36 PM »
I picked up my Uberti 1876 in 45-75 today will be mounting the pedersoli soule sight set on it as soon as the gunsmith bores out and retaps the top tang screw hole.  Also had to reverse the sight ladder so it would use the right notch in the base to keep it level.  Will take it shooting this weekend with the buckhorn though.
Adrian Geary
Samsula, FL
US Army Honorable Discharged  19E/45K
NRA, GAF, SUVCW

Offline Grizzly Adams

  • Top Active Citizen
  • *
  • Posts: 1308
  • Liked:
  • Likes Given: 4
Re: Welcome to the The Winchester Model 1876 board.
« Reply #37 on: February 19, 2008, 10:10:03 AM »
I picked up my Uberti 1876 in 45-75 today will be mounting the pedersoli soule sight set on it as soon as the gunsmith bores out and retaps the top tang screw hole.  Also had to reverse the sight ladder so it would use the right notch in the base to keep it level.  Will take it shooting this weekend with the buckhorn though.

Interesting.   Is the top tang hole NOT metric?  Or is the pedersoli sight not metric.  I was planning on putting a tang sight on mine, but noted that the rear tang/stock screw is nowhere near what the tang sight comes with.  Very small in diameter. :-\
If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
COMNAVFORV, NRA life, SASS Life, TG, STORM Rider #36.
GAF

Offline Colonel Buckshot

  • Top Active Citizen
  • *
  • Posts: 111
  • Liked:
  • Likes Given: 0
Re: Welcome to the The Winchester Model 1876 board.
« Reply #38 on: February 19, 2008, 01:21:21 PM »
I will have mine drilled and retapped. 
Adrian Geary
Samsula, FL
US Army Honorable Discharged  19E/45K
NRA, GAF, SUVCW

Offline Dirty Brass

  • Ol' Ter-Bear
  • Top Active Citizen
  • *
  • Posts: 674
  • Live life to the fullest!
    • TLC Guns & Ammo Inc
  • Liked:
  • Likes Given: 0
Re: Welcome to the The Winchester Model 1876 board.
« Reply #39 on: February 23, 2008, 01:53:07 PM »
I"m joining the group too. Should have my Uberti 1876 22" 45/60 by Monday evening. I'm also looking at a 50/95 28"" model Uberti, which I'll no doubt pick up, just because they look so cool. Beautiful guns - I'm gettin' ancy! Will post pics when in hand.  ;D

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com