Author Topic: 44 Magnum black powder load data. Let's collect some here.  (Read 33304 times)

Offline Dick Dastardly

  • Master of the Dark Arts - MDA
  • Top Active Citizen
  • *
  • Posts: 4629
    • Big Lube molds
  • Liked:
  • Likes Given: 4
44 Magnum black powder load data. Let's collect some here.
« on: April 10, 2007, 07:52:57 AM »
Howdy Pards,

Since there's no published data on this fine cartridge for black powder loads, let's collect some wisdom here.  Please post ONLY 44 Magnum data only.  I know there's a temptation to palaver about a lot of other fine cartridges, but the big 44 needs some attention.  I'd like to see load and graph data.

Again, please don't use this thread for other calibers.  It's the 44 Magnum that needs honest attention.  Lots of SASS legal guns are chambered in 44 Magnum and there's darn little usable data for this fine cartridge in Holy Black.

Yes, do put your Holy Black, Subs and Replicas here.  The bullets you use, the primers, the lube and all that makes 'em go for you.  After the thread runs for a while I'll try to sort it into a table and ask Cuts to file it in the bp library for reference.

Thanks,

DD-DLoS
Avid Ballistician in Holy Black
Riverboat Gambler and Wild Side Rambler
Gunfighter Ordinar
Purveyor of Big Lube supplies

Offline Dick Dastardly

  • Master of the Dark Arts - MDA
  • Top Active Citizen
  • *
  • Posts: 4629
    • Big Lube molds
  • Liked:
  • Likes Given: 4
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #1 on: April 10, 2007, 07:57:06 AM »
Here's what my load is.

44 Magnum brass (not fussy about brand)
CCI-300 primers
2.18cc (translates to about 35 grains) of FFFg Holy Black (Dragon/LIDU)
Mav Dutchman 200 grain Big Lube™ bullet lube/sized to .429 (Pearl Lube II)
Compress powder with bullet and crimp on press.
Complete nice tight crimp with LEE factory crimp die (roll crimp)

I'll edit this thread when I have some current graph data.  Probably this weekend.

DD-DLoS
Avid Ballistician in Holy Black
Riverboat Gambler and Wild Side Rambler
Gunfighter Ordinar
Purveyor of Big Lube supplies

Offline Silver Creek Slim

  • Buckaroo
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 18433
  • NCOWS #: 2329
  • GAF #: 144
  • Liked:
  • Likes Given: 104
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #2 on: April 10, 2007, 09:59:06 AM »
The following loads are 4 years old. I started down the path to the Darkside with Cleanshot (APP) because it was a gift, but switched to Goex because of cost savings. I cannot find the Cleanshot load data I was using.

1/22/2003
44 Mag mixed brass
Rem LP primers
24gr Goex FFFg
200gr RNFP 3-D/Hornady
3/16" grease cookie
waxed OJ (orange juice) card between grease cookie and powder
compressed with boolit and heavy crimp

5/13/2003
44 Mag mixed brass
Rem LP primers
32gr Goex FFFg
200gr RNFP
compressed with boolit and heavy crimp

Slim


NCOWS 2329, WartHog, SCORRS, SBSS, BHR, GAF, RBCS, Dirty RATS, BTBM, IPSAC, Cosie-in-training
I love the smell of Black Powder in the morning!

Advertising

  • Guest
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #3 on: Today at 12:58:21 PM »

Offline Trailrider

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 2366
    • Gunfighter Zone
  • Liked:
  • Likes Given: 0
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #3 on: April 10, 2007, 10:50:00 AM »
Howdy, Pards,

I have NOT shot .44 "Extra Long Russian" (that's .44 Magnum loaded to CAS specs), but can give you some guideline data on case capacities.  Checking .44 Magnum brass (Remington) against Winchester .44-40 brass, I find the Maggie brass to have a WATER capacity about 12.5 percent LESS than the .44-40, when loaded with the same bullets (213.5 gr).  IF MODERN .44-40 brass will handle 35 grains of FFFg, this would suggest a powder charge of 30.6 gr. of FFFg in the .44 Magnum case.  Obviously, different brass brands, bullet weights, powders, etc., will cause this to vary.

Ride to the sound of the guns, but watch out for bushwhackers! Godspeed to all in harm's way in the defense of Freedom! God Bless America!

Your obedient servant,
Trailrider,
Bvt. Lt. Col. Commanding,
Southern District
Dept. of the Platte, GAF

Offline Modoc

  • Top Active Citizen
  • *
  • Posts: 312
  • Editor, Shasta Regulators State of Jefferson
    • Shasta Regulators
  • Liked:
  • Likes Given: 27
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #4 on: April 10, 2007, 07:56:43 PM »
Dick,

Here is my load that I was using.

Misc. Brass (mostly Starline Nickle)
~30 gr Goex FFFg
Wad cut from cardboard milk carton (Lucern Acidophilus  ;))
.45 Cal Oxyoke Wonder Wad
200 Gr RNFP from Laser Cast :-\

I haven't loaded any more since I got the Snakebites from Springfield, but may now that a pard has the Mav Dutchman mold.  Sorry, no chronny on these (owner didn't want BP shot over it ::)).
Modoc

"He Who Laughs Last, Thinks Fastest"
SUDDS, SCORRS, Retired Warthog, Sometime Gunfighter, and Soot Deliante

Offline Dick Dastardly

  • Master of the Dark Arts - MDA
  • Top Active Citizen
  • *
  • Posts: 4629
    • Big Lube molds
  • Liked:
  • Likes Given: 4
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #5 on: April 10, 2007, 09:12:05 PM »
The discharge of Holy Black over the chrony don't do no bother.  Whut ya want to watch is that none of them wads hit the photocells tho.  I routinely shoot Genuine Powder loads over my Ohler 33 with no discernible ill effect, but I do shoot thru a cardboard appature to arrest the rampant flames and smoke rings. . .

Interestingly enuf tho, most of the bp loads I've graphed have very small Standard Deviations.  Just goes to prove that we shooters of the Holy Black ain't no deviates. . . . . . . ;D ;D

DD-DLoS
Avid Ballistician in Holy Black
Riverboat Gambler and Wild Side Rambler
Gunfighter Ordinar
Purveyor of Big Lube supplies

Offline Pettifogger

  • Top Active Citizen
  • *
  • Posts: 3613
  • Liked:
  • Likes Given: 19
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #6 on: April 11, 2007, 12:45:05 PM »
BP data is real simple and works for any caliber. 

1.) Fill case with powder
2.) Choose soft bullet with BP lube
3.) Jam bullet into case leaving no airspace
4.) Shoot

Nothing is simpler to use than real BP.  Don't need a scale or anything else.  The only thing that matters is making sure there is no airspace in the shell.

Offline Dick Dastardly

  • Master of the Dark Arts - MDA
  • Top Active Citizen
  • *
  • Posts: 4629
    • Big Lube molds
  • Liked:
  • Likes Given: 4
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #7 on: April 11, 2007, 01:08:48 PM »
Thanks Larsen,

You're right, you know.  Yes it is simple and your guidelines will work with any cartridge that's appropriate for black powder.  But, I wanted to collect enough loads that this fact is well illustrated.  That's why I'll be graphing some of my ammo and posting that also.  That is, if this dang snow storm (result of global warming - I'm sure) gets done and I get a hole in the overcast to work with.

DD-DLoS
Avid Ballistician in Holy Black
Riverboat Gambler and Wild Side Rambler
Gunfighter Ordinar
Purveyor of Big Lube supplies

Offline Dick Dastardly

  • Master of the Dark Arts - MDA
  • Top Active Citizen
  • *
  • Posts: 4629
    • Big Lube molds
  • Liked:
  • Likes Given: 4
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #8 on: April 15, 2007, 09:02:33 PM »
Some rounds over my Ohler 33 graph this afternoon, before the batteries went dead.

My standard load from above.

Browning 92 rifle

Average = 1165 fps

Standard deviation = 6.28 fps


Ruger Vaquero 7-1/2" barrel

Average = 956 fps

Standard deviation = 4.14 fps.

This stuff is pretty accurate ammo, as the above data would suggest.  I was a mite surprised that the same ammo in the pistol ran only 200 fps slower than the rifle.  I mean, 956 fps is getting on downrange pronto.  I did not get to test any of the 40 grain loads because the dang batteries quit.  I'll do this later and report back.

DD-DLoS
Avid Ballistician in Holy Black
Riverboat Gambler and Wild Side Rambler
Gunfighter Ordinar
Purveyor of Big Lube supplies

Offline fourfingersofdeath

  • The Old Loquacious one's loquacious signature:
  • Top Active Citizen
  • *
  • Posts: 922
  • Dang! Caught shooting a 357!
    • Mick's photobucket!
  • Liked:
  • Likes Given: 0
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #9 on: April 17, 2007, 05:47:17 AM »
That's why Elmer Keith felt that a person should use BP when learning to reload, no chance of a mistake as long as she's full.
All my cowboy gun's calibres start with a 4! It's gotta be big bore and whomp some!

BOLD No: 782
RATS No: 307
STORM No:267


www.boldlawdawgs.com

Offline Galloway

  • Top Active Citizen
  • *
  • Posts: 518
  • Liked:
  • Likes Given: 0
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #10 on: April 17, 2007, 05:36:42 PM »
Well I've been shooting the 40gr load with Schutzen FF and have also used Goex FF and Cartridge. When seatin the soft mav duchman bullets I get less deformation by seating just under the crimping groove. With the shorter 200gr lazer casts I seat as normal in the crimp groove. Cant wait for the chrono results.

Offline Brian Why

  • Purveyor of swell things
  • Very Active Citizen
  • *
  • Posts: 54
  • Carolina Cheap Date
  • Liked:
  • Likes Given: 0
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #11 on: April 18, 2007, 12:50:28 AM »
Galloway you just reminded me. I was wondering how the Mav's compare with Laser Casts. Which do you find to be more accurate / easier to clean up after?
Happy Trails,
Brian Why
SASS #71756, SCORRS, Darksider

"Everybody has their bad luck. I cough when I drink. You come up against sneaky people who get ya to help them commit suicide." - Doc Holliday, Hour Of The Gun

Offline Galloway

  • Top Active Citizen
  • *
  • Posts: 518
  • Liked:
  • Likes Given: 0
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #12 on: April 18, 2007, 10:43:36 PM »
The Mav's better hands down but I'll mention a few things. LC's only shoot about an inch bigger group but give occasional flyers that open the group about three additional inches. So what should have been a three inch group at 25yards will become a six, whereas the Mav's will consistantly do two inches. Thats with a dirty barrel though so the first 10-15 shots will do 3 inches if the barrels clean. This is with a 20'' 1892 by the way. The LC's work well in revolvers and I'll continue to use them and save the Mavs for the rifle. Like I mentioned above the LC's are shorter and allow the 40gr load to be seated properly without deformation. One thing that isnt mentioned often about the Mav is it has awesome  meplate and should be quite the killer of game which I'll be testing in the future.

Offline Dick Dastardly

  • Master of the Dark Arts - MDA
  • Top Active Citizen
  • *
  • Posts: 4629
    • Big Lube molds
  • Liked:
  • Likes Given: 4
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #13 on: April 19, 2007, 07:34:14 AM »
Howdy Pards,

I only know of one deer that's been shot with a black powder loaded Mav Dutchman bullet out of a 44 Mag rifle so far.  Not much data.  Deer died promptly.  Entire top of heart was gone.  I'll let you know if the next one lasts longer.

DD-DLoS
Avid Ballistician in Holy Black
Riverboat Gambler and Wild Side Rambler
Gunfighter Ordinar
Purveyor of Big Lube supplies

Offline Dick Dastardly

  • Master of the Dark Arts - MDA
  • Top Active Citizen
  • *
  • Posts: 4629
    • Big Lube molds
  • Liked:
  • Likes Given: 4
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #14 on: December 29, 2011, 11:40:44 AM »
My shooting Pard, Pukin' Dog, shot two deer on my property just after Thanksgiving.  He was running his 44-40 Cowboy loads.  Both deer died promptly.  There was very little ruined meat.  One bullet was recovered.  It was the usual Mav Dutchman that weighs 205 grains as dropped.  The recovered bullet, from under the hide on the far side of the deer, weighed. . . . . 205 GRAINS  How's that for weight retention.  The bullet was deformed some on the nose but from all appearances, it didn't tumble going thru the deer.

One deer was close, about 50 yards, and the other was about 100 yards.

DD-MDA
Avid Ballistician in Holy Black
Riverboat Gambler and Wild Side Rambler
Gunfighter Ordinar
Purveyor of Big Lube supplies

Offline w44wcf

  • Top Active Citizen
  • *
  • Posts: 1148
  • Liked:
  • Likes Given: 0
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #15 on: December 29, 2011, 12:27:25 PM »
DD,
Thank you for the MAV Dutchman deer harvesting reports.  Nice job. ;D
That big meplat keeps the bullet going front end first.

w44wcf
aka Jack Christian SASS 11993 "I can do all things through Christ who strengthens me." Philippians 4:13
aka John Kort
aka w30wcf (smokeless)
NRA Life Member
.22 W.C.F., .30 W.C.F., .44 W.C.F., .45 Colt Cartridge Historian

Offline Rev Willy Duncum

  • Active citizen
  • *
  • Posts: 38
  • Liked:
  • Likes Given: 0
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #16 on: January 01, 2012, 02:41:37 PM »
I load the same 44 mag for a pr of Ruger Vaqueros with 5 1/2" bbls , a pr of Ruger Bisleys with 5 1/2" bbls and my Marlin 1894 Cowboy. 

LOAD 1
Note:  Even tho APP says no lube is needed, this seems to need more attention to wiping down between stages than other powders.
Cases:  Assorted mfg brass (no nickle)
Primer:  Federal Lg Pistol
Bullet:  200gr RNFP Lead sized 429
Wad:  None
Powder:  APP (Jim Shockey's Gold) BP Substitute
Crimp:  Lee Carbide Factory Crimp Die 44 mag heavy crimp

Load 2
Note: Plenty of smoke and flame, less 'bark' and easier to control on target
Cases:  Assorted mfg brass (no nickle)
Primer:  Federal Lg Pistol
Bullet:  200gr RNFP lead sized 429
Wad:  Circle Fly prelubed 430 (1/2 wad)
Powder:  Goex FFFG 1.9CC (30.3gr)
Crimp:  Lee Carbide Factory Crimp Die 44 mag heavy crimp

Load 3
****Favorite load**** Plenty of 'bark' and a crowd favorite (WARTHOG)
Cases:  Assorted mfg brass (no nickle)
Primer:  Federal Lg Pistol
Bullet:  44 MAV Big Lube 200gr sized 429
Wad:  None
Powder:  Goex FFFG 2.2CC (35 gr)
Crimp:  Lee Carbide Factory Crimp Die 44 mag heavy crimp

Occasionally I will use Pyrodex as a BP substitute if that's all I can get and use a prelube wad with it.  Everything else is the same. 

I have never chrono'd these so I do not know what the fps would be.
Preacher of the Old Order Dunkards, down by the river, drop in sometime.

He needed a lot of baptizin' so I just held him under a little too long.  And your point is?

Offline cpt dan blodgett

  • Top Active Citizen
  • *
  • Posts: 1693
  • SASS Conv 2013
  • Liked:
  • Likes Given: 3
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #17 on: January 01, 2012, 04:49:34 PM »
I loaded up some 44 mags a while back with the same 1.9 cc of holy black FFg Schuetzen, topped with a Dr Pepper case wad and a hand lubed billy bullet (moly coted that has a 1/8 inch semi circular lube groove, decent crimp in the regular crimp groove.  Shot fine out of rugers and a 92 rossi.  No hard fouling pretty much shot where pointed. 

Used the same load substiuting a lube cookie or a homemade wonder wad with a Dr Pepper Patch on top as well out of a 45 colt using bear creek moly cotes.  Shot fine out of both my RNVs and a Buff Classic Carbine 45 colt.  The RNVs shot about 4 inches low at 15 yards with the 200 grain bullets.  The bear creek bullets don't have a lube groove so used the cookie or wonder wad.  No wierd fouling in bore.  Rifle shot ok at 25 yards.  Was really seeing if it would work as a plainsman rifle load.  It is fine but since have determined my Armi Sports Sharps really likes that load and 2.2 CC of Walnut media topped with a .062 wad and the wonderwad at 25 yards

Could not see buying new bullets just to shoot bp have something like 4k of the 44 and 45 molys
Queen of Battle - "Follow Me"
NRA Life
DAV Life
ROI, ROII

Offline Grapeshot

  • Grapeshot. Cpt US Artillery
  • Top Active Citizen
  • *
  • Posts: 1107
  • WARTHOG
  • Liked:
  • Likes Given: 2
Re: 44 Magnum black powder load data. Let's collect some here.
« Reply #18 on: April 04, 2012, 06:39:56 AM »
I load the .44 Extra Long Russian for a friend of mine.  I use 1.9cc's of Pinacle, Lyman's Coyboy boolit that I cast, sized to .430, or any other lead RNFP that he gives me.  I employ a wad cut from soda can cartons and touch all of that off with a WLP primer.  He has fun shooting them at the CAS match we attend and he's happy.
Listen!  Do you hear that?  The roar of Cannons and the screams of the dying.  Ahh!  Music to my ears.

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com