Cas City Forum Hall & CAS-L

Special Interests - Groups & Societies => Uberti, Pietta and other SAA Clones => Topic started by: Cholla Hill Tirador on March 13, 2017, 09:09:39 AM

Title: April 2017 Handloader Magazine- Uberti Info
Post by: Cholla Hill Tirador on March 13, 2017, 09:09:39 AM
Anyone had a chance to see the April 2017 issue of Handloader magazine? A reader submittied a question regarding loads for a Uberti 45 Colt. Brian Pearce answered with some very good information of recent production Uberti's including how the recent models are of very good quality and that they're significantly stronger than older ones due to the cylinder being .020" larger. Good stuff.

  CHT
Title: Re: April 2017 Handloader Magazine- Uberti Info
Post by: Navy Six on March 13, 2017, 06:16:14 PM
I look forward to anything Brian Pearce publishes about shooting. Whatever he puts in print is the result of extensive real-world experience. Plus he is an excellent story teller who can also write. It is something special to combine these talents and still sound modest and unassuming. He has earned a spot on my all time favorite list along with Keith, Skelton and Taffin.
Title: Re: April 2017 Handloader Magazine- Uberti Info
Post by: Bunk Stagnerg on March 14, 2017, 05:05:43 PM
Mystery solved now I see why my holsters made for Gen1 guns are a tight fit for my Uberti SA's. My leather man thought somewhere he made an error.
Yr' Obt' Svt'
Bunk
Title: Re: April 2017 Handloader Magazine- Uberti Info
Post by: Virginia Gentleman on March 15, 2017, 07:52:15 PM
There is little doubt that the Uberti replicas are stronger than a 1st gen Colt, but, they are not as strong as a Ruger so to be on the safe side stay with standard loads.
Title: Re: April 2017 Handloader Magazine- Uberti Info
Post by: Cholla Hill Tirador on March 15, 2017, 11:36:07 PM
There is little doubt that the Uberti replicas are stronger than a 1st gen Colt, but, they are not as strong as a Ruger so to be on the safe side stay with standard loads.

  Actually their strength level, according to the author, is the same as the all-American made USFA's and the Ruger New Vaqueros; 21-22,000 psi.

  CHT
Title: Re: April 2017 Handloader Magazine- Uberti Info
Post by: Galloway on March 16, 2017, 09:02:24 AM
Oh man look at all the old vs new vaquero confusion that still comes up. Now uberti's gonna add even more lol.
Title: Re: April 2017 Handloader Magazine- Uberti Info
Post by: Cholla Hill Tirador on March 16, 2017, 09:12:04 AM
Oh man look at all the old vs new vaquero confusion that still comes up. Now uberti's gonna add even more lol.

 LOL...yup. To my knowledge, Handloader magazine, and specifically Brian Pearce, provide the only load data for that niche of revolvers. At www.loaddata.com loads for these revolvers are typically listed as 20,000 psi or 23,000 psi and recommended for "U.S. Fire Arms revolvers that are 100 percent American made (after the year 2000), Colt New Service, Ruger New Vaquero and Smith & Wesson post-World War II N Frames, including Models 25 and 625 Mountain Guns" and now of course, recent Uberti's!

    CHT