Javascript DHTML Drop Down Menu Powered by
Welcome, Guest. Please login or register.
November 21, 2018, 01:58:18 pm

Login with username, password and session length

Search:     Advanced search
* Home FlashChat Help Calendar Login Register
Currently there are 0 Users in the Cas City Chat Rooms!
Cas City Forum Hall & CAS-L  |  CAS TOPICS  |  The Darksider's Den  |  The Dark Arts (Moderator: Lucky Irish Tom)  |  Topic: Making BP .45s work in long gunz 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: 1 [2] Go Down Print
Author Topic: Making BP .45s work in long gunz  (Read 27947 times)
Russ T Chambers
Littlest ol' fart Cowboy in Nevada Territory
CAS-L Ghost Rider
Top Active Citizen
Offline Offline

Posts: 2084

Well preserved for my age!

« Reply #25 on: April 07, 2006, 11:03:56 am »

I've been followin' this too, and I thought I musta been an aberation too!  Roll Eyes Roll Eyes   My '73 has been feedin' BP .45s since I got it, with nary a burp!   Cheesy     The cases look just as dirty (or clean Roll Eyes) as the ones comin outa my pistols!  Must be sumthin' in the air up here in Nevada Territory! Roll Eyes Grin

Russ T. Chambers
Roop County Cowboy Shooters Association
SASS Lifer/Regulator #262
SBSS #1441
CRPA Lifer 
NRA Benefactor Member
Brother of the Arrow
Sunwapta Haze
Top Active Citizen
Offline Offline

Posts: 105

« Reply #26 on: September 11, 2006, 12:15:40 am »

While I don't shoot 45s I do shoot 38 spl. with the Holy Black in a '94 Marlin.  I have had much trouble over the past with carrier fouling from blow by.  I thought I was getting chamber fouling but determined that was not the case as, when I experienced feed problems, I could easily push the cartridge into the chamber with my finger.  Basically it appeared as though the enrty angle into the chamber was too steep and the cartridge was wedging against the frame. 

I have found the solution to my problem!  I am now using a Redding crimp die (after trying RCBS Cowboy crimp die, Lee taper crimp die and Lee Factory crimp die  - none of which would allow more than 20 rounds to be fired before feed problems occured).  I just finished shooting a 10 stage match and side matches without any intermediate cleaning and the last round feed just as easily as the first.  I am a happy happy man  Smiley Smiley.

Vaya con Dios, Amigos

Sunwapta Haze
Darkside Acolyte
Offline Offline

Posts: 1

« Reply #27 on: February 10, 2007, 11:52:00 am »

I don't shoot black, so I'm not meaning to present myself as an expert regarding the blow-back issue in .45-Colt.

However, I do know that the .454-Casull is chambered 'very tight' to help deal with the high pressures of that hot-rod round.  If you wanted to test the tight-chamber theory to reduce or eliminate blow-back you could re-size your .45-Colt brass in .454-Casull dies, and shoot the resulting handload in a firearm chambered in .454-Casull.

As for design parameters related to cartridge pressure, I believe the .44-Mag and .357-Mag are close to the same. 

And for what it's worth, you get more blow-back with LOW-pressure SMOKELESS-Powder loads in .44-Mag and .45-Colt than you do in .44-40 and .38-40... this is my experience anyway, as my .45-Colt / .44-Mag cases are much dirtier after a shoot as compared to my .44-40 / 38-40 cases.--CC

Top Active Citizen
Offline Offline

Posts: 1578

« Reply #28 on: February 11, 2007, 12:19:04 pm »

I may have missed it in this thread but didn't we used to set the lead melter at an annealing temperature and dip the mouths of the cases in the molten lead until the lead slides off and then drop them into cool water?  Works for me.
Cuts Crooked
Deputy Marshal
Top Active Citizen
Offline Offline

Posts: 1307

« Reply #29 on: February 11, 2007, 05:55:57 pm »

Guys, I'd appreciate it you stick to the topic of thread, the .45 in lever guns. I want this thread to helpful to those who are working with that combination. The other caliber discussions are not helpful.

Dark Lord of the Soot
Honorary member of the Mormon Posse
NCOWS #2250
SASS #36914 like you don't need the money, love like you've never been hurt, and dance like you do when nobody is watching...
Top Active Citizen
Offline Offline

Posts: 1148

« Reply #30 on: September 28, 2009, 02:48:33 pm »

Here's a pic showing just how very well annealing and partial sizing the .45 Colt case works with b.p. Grin
Now that's what I call clean!..........

Happy Trails,

aka Jack Christian SASS 11993 "I can do all things through Christ who strengthens me." Philippians 4:13
aka John Kort
aka w30wcf (smokeless)
NRA Life Member
.22 W.C.F., .30 W.C.F., .44 W.C.F., .45 Colt Cartridge Historian
Paladin UK
UK`s 1st Warthog
Top Active Citizen
Offline Offline

Posts: 1548

Have Gun.. "Might Travel"

« Reply #31 on: October 26, 2009, 02:15:32 pm »

Fer w44wff...............

Mine are just the same, tumbled mine Sunday so all mine are nice `n` shiney agin!! BUT next shoot I`ll post some as well, really is a case of .................

What I`ve done (looks like you have too) is use Magtech as they have a nice dotted line jest where ya wann be heatin,  `n` neck sizin.  Grin

Paladin (Whut lurvs his .45  Cheesy ) UK

I Ride with the `Picketts Hill Marshals`..... A mean pistol packin bunch a No goods

The UK`s 1st Warthog!!... Soot Lord, and Profound believer in tha....`Holy Black` 
 MASTER... The Sublyme & Holy Order of the Soot (SHOTS)
  BWSS#033  SCORRS  SBSS#836L  STORM#303

  Real Cowboys Shoot with BLACK POWDER!!

 Paladins Web Site

     Paladins Very Own Shotshell Loader This is an animaton so it takes a while fer the 1st page ta go..
Pages: 1 [2] Go Up Print 
Cas City Forum Hall & CAS-L  |  CAS TOPICS  |  The Darksider's Den  |  The Dark Arts (Moderator: Lucky Irish Tom)  |  Topic: Making BP .45s work in long gunz « previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.059 seconds with 22 queries.