Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
Welcome, Guest. Please login or register.
Did you miss your activation email?
January 18, 2018, 10:22:06 am

Login with username, password and session length

Search:     Advanced search
* Home FlashChat Help Calendar Login Register
Currently there are 0 Users in the Cas City Chat Rooms!
Cas City Forum Hall & CAS-L  |  Special Interests - Groups & Societies  |  Spencer Shooting Society (Moderator: Two Flints)  |  Topic: Disassembling question 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Disassembling question  (Read 222 times)
LISpencer
Citizen
*
Offline Offline

Posts: 2


« on: December 30, 2017, 05:08:58 pm »


 Hi guys
Im a new guy on the forum.Just bought a Spencer Carbine with a broken front trigger screw.
I got the 2 other screws out but I am not sure how to remove the plate because the trigger is in the way.
Any advise would be greatly appreciated....
Logged
Ibgreen
Top Active Citizen
*
Offline Offline

Posts: 222


« Reply #1 on: January 01, 2018, 01:29:12 pm »

Are you able to post a picture?
Logged
Rim fire
Top Active Citizen
*
Offline Offline

Posts: 115


« Reply #2 on: January 01, 2018, 09:33:54 pm »

The plate, if you mean the lock plate, that should come out without removing the trigger plate.  Try moving the trigger forward to clear the sear.  If you mean the trigger plate, then you need an easy out to remove the broken screw.
Logged
El Supremo
kevintinny@hotmail.com
Top Active Citizen
*
Offline Offline

Posts: 227


« Reply #3 on: January 02, 2018, 08:10:26 am »

Hello:

One important aspect is that the hammer MUST be at half-cock before removing the lock or the tail of the sear bar WILL catch on the wood and drag off a nasty splinter.  I have seen a few that had the interference point on the sear bar ground away to prevent this, but don't count on it.

Regards,
El Supremo/Kevin Tinny
Logged

Pay attention to that soft voice in your head.
Rim fire
Top Active Citizen
*
Offline Offline

Posts: 115


« Reply #4 on: January 02, 2018, 08:34:45 pm »

Good advice!
Logged
Pages: [1] Go Up Print 
Cas City Forum Hall & CAS-L  |  Special Interests - Groups & Societies  |  Spencer Shooting Society (Moderator: Two Flints)  |  Topic: Disassembling question « previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.051 seconds with 21 queries.