Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2017, 05:08:33 pm

Login with username, password and session length

Search:     Advanced search
* Home FlashChat Help Calendar Login Register
Currently there are 0 Users in the Cas City Chat Rooms!
Cas City Forum Hall & CAS-L  |  Special Interests - Groups & Societies  |  The Winchester Model 1876 (Moderator: Grizzly Adams)  |  Topic: Uberti 1876 in 50-95 WCF 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Uberti 1876 in 50-95 WCF  (Read 486 times)
RedBaron
Citizen
*
Offline Offline

Posts: 21


« on: November 10, 2017, 12:31:07 pm »


Gentlemen... has anyone used the Accurate molds  51- 335V, 51-350C, or 51-350CL in their 50-95's. And, if so, which one did you specifically use. Performance?
Logged
kwilliams1876
Very Active Citizen
*
Offline Offline

Posts: 85


« Reply #1 on: November 12, 2017, 02:11:26 pm »

i never had any 100 yd. accuracy luck in my rifle with the lighter bullets and ubertis 1 in 48" twist. i tried many molds, but not accurate molds. i did not want to spend the money on say a 350 grainer when other similar makes i tried where terrible. i collect molds, so have a few to play with and the old ideal/lyman 512138 has out performed the previous 6 light to medium wt. versions i tried.
best
kw
Logged
dusty texian
Chief Scout Wehmeyer Ranch's.
NCOWS
Top Active Citizen
***
Offline Offline

Posts: 1390


Dusty Texian


« Reply #2 on: November 15, 2017, 03:37:42 pm »

I'm thinking on trying the 51-350C . What kind of 100 yd. accuracey are you guy's getting with the Uberti 50/95 and 1-48 ROT . I'm running a custom barrel 24" long 50/95 with a 1-38" ROT on an original action . The 300 gr. and 350 gr. bullets are giving good accurate groups @ 100 yd.  with Swiss Bp.   4" and 5",,,, 5 shot groups . About all I can do with iron sights at 100 yd.  ,,,DT
Logged
kwilliams1876
Very Active Citizen
*
Offline Offline

Posts: 85


« Reply #3 on: November 16, 2017, 08:27:34 am »

4-5 in groups with a short barrel is some great 100 yd. shooting, the faster twist cant hurt. are you using a tang sight to work up loads?    i have a quality one on my 28" rifle to help in development.

thinking about taking mine elk hunting today.
best
kw
Logged
dusty texian
Chief Scout Wehmeyer Ranch's.
NCOWS
Top Active Citizen
***
Offline Offline

Posts: 1390


Dusty Texian


« Reply #4 on: November 16, 2017, 09:11:55 am »

On that one I use a Lyman tang sight , helps a lot ! At 75yd. I tend to do a lot better on group size .   Good luck on the Elk today . DT 





Logged
RedBaron
Citizen
*
Offline Offline

Posts: 21


« Reply #5 on: November 16, 2017, 12:02:29 pm »

I received my Presidio 76 from Cimarron this week. Bore/groove diameter a full .515"-.5155". Ordered an appropriate (size) mold from Accurate. Specifically the 51-350C. Must say I was somewhat surprised about the bore size. Severely limits what molds/bullets I could use. Will have to wait 4-5 plus weeks to, hopefully, be able to cast a bullet that will prove to be accurate.  Like the Top (ZZ) song says.." It ain't all good, but its what we got".
Logged
Coal Creek Griff
Top Active Citizen
*
Offline Offline

Posts: 1210


With Cheyenne Luke


« Reply #6 on: November 16, 2017, 12:58:27 pm »

Be sure to report back on how that bullet performs.  Many people use this site for research prior to making their own decisions and, as you may have noticed, there isn't a lot of info as to what works well in Uberti guns in this caliber.

Thanks.

CC Griff
Logged

BOLD #921
BOSS #196
1860 Henry Rifle Shooter #173
SSS #573
RedBaron
Citizen
*
Offline Offline

Posts: 21


« Reply #7 on: November 16, 2017, 02:58:18 pm »

Will do. Nothing came easy with the 1st Uberti 76 in 45-60 WCF. Vowed I would not buy another. Then along comes the Presidio carbine. In 50-95 no less. So much for promises. Hold out hope the preparation, not to mention the expense, will pay off.
Logged
kwilliams1876
Very Active Citizen
*
Offline Offline

Posts: 85


« Reply #8 on: November 16, 2017, 04:00:11 pm »

 examine your presidio closely , check the muzzle crown right away for concentricity. mine was absolutely atrocious. had to re-cut it in my lathe!  soo sad when one pays this kind of money.
best
kw
Logged
RedBaron
Citizen
*
Offline Offline

Posts: 21


« Reply #9 on: November 16, 2017, 04:07:13 pm »

I will. Still nonplussed over the bore/groove diameter. Curious what your serial number is. Mine was #38.
Logged
greyhawk
Top Active Citizen
*
Offline Offline

Posts: 197


« Reply #10 on: November 16, 2017, 05:52:56 pm »

I will. Still nonplussed over the bore/groove diameter. Curious what your serial number is. Mine was #38.

Thats a couple of sad stories !
My Uberti 45/75 turned out nice with no hassles - shoots a 458 sized slug at 335grain or a 405 grain both over a full case of black - the trigger pull was atrocious out of the box but I blamed lawyers for that - got it worked out reasonable now - I shoot soft boolits (in all my lead boolit guns) just enough alloy to make em cast ok - there seems to be a deal in the US to use hard cast and I wonder whether that is behind a lot of the accuracy troubles  that are reported? Also think it might be more difficult to get some of these old style guns going properly with smokeyless and subs than it is with a charge of decent blackpowder --maybe??
If I was buying another '76 I would look for a 50/95 with 22inch barrel - I am only a little dude and that 76 of mine is 11pounds+ with a fulll magazine of 400grainers - might be me favorite gun tho!
Logged
Pages: [1] Go Up Print 
Cas City Forum Hall & CAS-L  |  Special Interests - Groups & Societies  |  The Winchester Model 1876 (Moderator: Grizzly Adams)  |  Topic: Uberti 1876 in 50-95 WCF « previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.046 seconds with 22 queries.