Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 20, 2017, 09:35:01 pm

Login with username, password and session length

Search:     Advanced search
* Home FlashChat Help Calendar Login Register
Currently there are 0 Users in the Cas City Chat Rooms!
Cas City Forum Hall & CAS-L  |  Special Interests - Groups & Societies  |  Frontier Iron (Moderator: St. George)  |  Topic: Schofield over rotating 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Schofield over rotating  (Read 1166 times)
Cody Bill
Citizen
*
Offline Offline

Posts: 19


« on: September 25, 2017, 08:14:25 pm »


My schofield over rotates sometimes when cocking. I bought the gun new last winter and had the same problem out of the box. Sent it to Taylor's and thought there gunsmith fixed the problem but now the problems back. Any ideas what's going on.
Logged
Tuolumne Lawman
CAS-L Ghost Rider
Top Active Citizen
*
Online Online

Posts: 1828


Grass Valley, CA in the Sierra Nevada Mountains


« Reply #1 on: September 26, 2017, 09:04:49 pm »

Possibly a weak or binding spring not pushing the cylinder stop up correctly. Cal Taylor's again.
Logged

TUOLUMNE LAWMAN
CO. F, 12th Illinois Cavalry  SASS # 6127 Life * Spencer Shooting Society #43 * Motherlode Shootist Society #1 * River City Regulators
llanerosolitario
Very Active Citizen
*
Offline Offline

Posts: 64


« Reply #2 on: September 29, 2017, 06:36:30 am »

weak bolt spring or late bolt, or both. in Most cases, when the bolt spring is ok, the problem lies in a very critical bolt release, that may let the cylinder overotate.

it can be fixed with an earlier bolt realease, that will prevent the cilinder to acelerate and miss aligment....it did happened to my Uberti as it came from Factory....in my case I adjusted the  bolt release to take place as soon as possible after half cock. with a rational margin.
Logged
Lucky R. K.
Purveyor of Fire & Brimstone
Top Active Citizen
*
Offline Offline

Posts: 315



« Reply #3 on: September 30, 2017, 08:08:20 am »


I would put my money on a weak bolt spring.

Lucky
Logged

Greene County Regulators       Life NRA             SCORRS
High Country Cowboys            SASS #79366
Gunpowder Creek Regulators   Dirty RATS #568

The Wind is Your Friend
Abilene
Top Active Citizen
*
Offline Offline

Posts: 2296



WWW
« Reply #4 on: September 30, 2017, 01:47:43 pm »

i would call Taylors and talk to the gunsmith.  Since it is the same problem, it is likely that it has the same cause.  Since he has fixed it once, he may have a good idea what it might be this time.  They may want you to send it back, but he may also be able to suggest something you can do yourself and/or send you a needed part.  This is assuming you are comfortable working on the gun.

Weak spring sounds likely to me, but I don't know S&W actions.  You might also re-post this in the gunsmithing section.  There are some folks like Pettifogger who know lotsa stuff but don't check all the forums here.
Logged

Pages: [1] Go Up Print 
Cas City Forum Hall & CAS-L  |  Special Interests - Groups & Societies  |  Frontier Iron (Moderator: St. George)  |  Topic: Schofield over rotating « previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.068 seconds with 21 queries.