Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 19, 2017, 02:46:59 pm

Login with username, password and session length

Search:     Advanced search
* Home FlashChat Help Calendar Login Register
Currently there are 0 Users in the Cas City Chat Rooms!
Cas City Forum Hall & CAS-L  |  Special Interests - Groups & Societies  |  1860 Henry (Moderators: Flint, Major 2)  |  Topic: Taylor's & Co. Win 1866 "Musket" .44-40 on Special Order List... 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: Taylor's & Co. Win 1866 "Musket" .44-40 on Special Order List...  (Read 2598 times)
mtmarfield
Top Active Citizen
*
Offline Offline

Posts: 377


« on: May 30, 2017, 03:58:42 pm »


   Greetings!

   A 'phone call to Tammy at Taylor's & Co. has confirmed a wish: the Winchester 1866
"Musket" (Infantry Rifle) chambered for the .44-40 ctg is available as a Special Order Item
with a 9 to 12 month turn-around, and is currently priced at $1330.00. This Special Order
requires a 1/2 Deposit.
   I was given permission to post this by Tammy, after having read the particulars back to
her for accuracy.
   If you have ever entertained the notion of owning a replica Winchester 1866 Musket,
this might be a great opportunity for you!

                 M.T.Marfield
Logged
Abilene
Top Active Citizen
*
Online Online

Posts: 2296



WWW
« Reply #1 on: May 30, 2017, 05:33:08 pm »

Well, that's cool!  Any mention of bayonets?
Logged

mtmarfield
Top Active Citizen
*
Offline Offline

Posts: 377


« Reply #2 on: May 30, 2017, 06:57:29 pm »

   Greetings!

   NO! I forgot to ask, although I can guess what the answer would be.
Actually, I've been thinking about bayonets all day since... I wonder if
something from DGW ( or, ? ) could be "jimmyed" to work.

                 M.T.Marfield
Logged
treebeard
Top Active Citizen
*
Offline Offline

Posts: 284



« Reply #3 on: May 30, 2017, 08:05:32 pm »

How long is the barrel?
Logged
mtmarfield
Top Active Citizen
*
Offline Offline

Posts: 377


« Reply #4 on: May 30, 2017, 08:22:14 pm »

   Greetings!

   Treebeard, Tammy indicated that the barrel is 27" long.

                 M.T.Marfield
Logged
Baltimore Ed
Top Active Citizen
*
Offline Offline

Posts: 494



« Reply #5 on: May 30, 2017, 08:24:42 pm »

I made a Trapdoor Springfield bayonet fit my original 1873 musket by completely lining the socket with thinwall brass tubing cutting out where the front sight slides in and out. Worked fine but mounts to the right. The 73 musket bayonet is unusual because it hangs under the barrel. I've shot my musket with both and like the look of the Trapdoor bayonet but either one hung on a rifle with a 30 inch barrel is damn intimidating. There is a bayonets of the world web page that lists every US bayonet with lengths and id's of the sockets that is very useful.


* image.jpeg (178.67 KB, 768x1024 - viewed 68 times.)
Logged

"Give'em hell, Pike"
mtmarfield
Top Active Citizen
*
Offline Offline

Posts: 377


« Reply #6 on: May 31, 2017, 03:30:05 pm »

   Greetings!

   Baltimore Ed, you won't believe this, but just such a notion was going through my
head, re: fitting an incorrect bayonet!
   Would you please post details on how you did this, as far as what diameter tubing
you used, soldering / brazing procedure, etc? I would want a bayonet for mine, and
I'm sure that I'm not alone!

                  M.T.Marfield
Logged
Baltimore Ed
Top Active Citizen
*
Offline Offline

Posts: 494



« Reply #7 on: May 31, 2017, 08:42:16 pm »

My first unknown socket bayonet that I  bought years ago to use as part of my British RE outfit turned out to be for a Trapdoor Springfield. When I bought my original 73 musket and tried to mount the bayonet to it the socket was too big to fit the Winchester. I had some scrap thinwall brass 3/4 inch OD tubing that had come off a brass bed headboard in my shop. Hint: Never throw things out that might become useful. Let your kids do that after you're dead. I cut it to the correct length of the socket and made a longitudinal cut and filed and fitted until the tubing would compress and force slide into the smaller diameter socket. I then traced the lock slot onto the brass and drove the tubing out with a piece of conduit and cut out the lock slot. The long slit in the brass is to the left of the front sight and the zig zag cut is off the other side. Then I drove it back in and filed the brass back as needed to get it to clear the front sight and fit the barrel. I wasn't sure about gluing it in but as it's a tight fit and the brass is springy it's not moving at all. Here are some pix. The bayonet web page is worldbayonets.com.


* image.jpeg (138.75 KB, 768x1024 - viewed 72 times.)

* image.jpeg (132.54 KB, 768x1024 - viewed 68 times.)

* image.jpeg (96.05 KB, 768x1024 - viewed 58 times.)
Logged

"Give'em hell, Pike"
Baltimore Ed
Top Active Citizen
*
Offline Offline

Posts: 494



« Reply #8 on: May 31, 2017, 08:47:04 pm »

You want to go to pg 5 of the socket bayonet lists under US to find what you need. Looks like you would need thicker brass than what i used to get it small enough. Maybe someone with a 66 Uberti musket could mic the last 3 inches of bbl and let us know what the actual measurements are. I plan to reline the Trapdoor bayonet's socket to fit the 1866 whenever the musket arrives.


* image.jpeg (172.21 KB, 768x1024 - viewed 52 times.)

* image.jpeg (78.94 KB, 768x1024 - viewed 41 times.)
Logged

"Give'em hell, Pike"
mtmarfield
Top Active Citizen
*
Offline Offline

Posts: 377


« Reply #9 on: June 01, 2017, 06:08:41 pm »

   Greetings!

   Thanks Mucho, B.Ed!

                 M.T.Marfield
Logged
Baltimore Ed
Top Active Citizen
*
Offline Offline

Posts: 494



« Reply #10 on: June 07, 2017, 02:50:41 pm »

M.T., just got off the phone with a buddy who has an older 66 Uberti musket. He was nice enough to measure the od of the bbl for me.
.687--- at muzzle
.702-- 2 inches from muzzle
.708--3 inches from muzzle 
But I don't know if these dimensions are what Uberti/Taylors are using now. If they are correct then the Uberti guns are too big for an original 66 bayonet. We won't know our actual dimensions until Santa emails us that our rifles have showed up. The brass tubing that I used is .022 thick. My trapdoor Springfield bayonet socket with this lining would be about .010 too small using his numbers. You could easily remove that much material. Plus there could easily be that much slop between one bayonet socket to another or bbl to bbl. I would say try to find yourself a decent Trapdoor bayonet to use. I'll look in my shop and see if I have any more brass tubing.
B.E.
Logged

"Give'em hell, Pike"
mtmarfield
Top Active Citizen
*
Offline Offline

Posts: 377


« Reply #11 on: June 07, 2017, 03:43:42 pm »

   Greetings!

   Thanks for the Info!

                 M.T.Marfield
Logged
Baltimore Ed
Top Active Citizen
*
Offline Offline

Posts: 494



« Reply #12 on: July 25, 2017, 11:27:32 am »

M.T., I GOT THE CALL!  My 66 musket has arrived at Taylors in VA. Now to arrange payment and shipment to my FFL guys. I also will order springs, screws and a decent mainspring and be done with the upgrades. Thought I'd let you know. Maybe I'll get to shoot it in our August  shoot.
Logged

"Give'em hell, Pike"
Jake C
Department of the Atlantic, GAF # 834
Top Active Citizen
*
Offline Offline

Posts: 476


« Reply #13 on: July 25, 2017, 12:13:08 pm »

M.T., I GOT THE CALL!  My 66 musket has arrived at Taylors in VA. Now to arrange payment and shipment to my FFL guys. I also will order springs, screws and a decent mainspring and be done with the upgrades. Thought I'd let you know. Maybe I'll get to shoot it in our August  shoot.

You've got to post pictures ASAP! I'm excited to see how these look  Grin
Logged

Win with ability, not with numbers.- Alexander Suvorov, Russian Field Marshal, 1729-1800
mtmarfield
Top Active Citizen
*
Offline Offline

Posts: 377


« Reply #14 on: July 25, 2017, 12:13:41 pm »

   Greetings!

   That's fantastic! Perhaps mine is on the way, as well...!

                M.T.Marfield
Logged
mtmarfield
Top Active Citizen
*
Offline Offline

Posts: 377


« Reply #15 on: July 27, 2017, 10:35:45 pm »

   Greetings!

   I've received my "Trapdoor Bayonet" that I acquired via eBay; it appears to
be half-way decent, with, say, 85% blue, and not too much in the way of dings...

                M.T.Marfield
Logged
Baltimore Ed
Top Active Citizen
*
Offline Offline

Posts: 494



« Reply #16 on: July 28, 2017, 09:42:13 pm »

MT, I own three 73s and the only issues have been the soft italian screws and crazy strong springs. But my musket will be my first 66. In my research I'm reading about the loading gate having issues. Do I have to replace or tinker with the loading gate with this rifle? My rifle should be here next week. Replacement springs came today.
Logged

"Give'em hell, Pike"
Coffinmaker
Top Active Citizen
*
Offline Offline

Posts: 4259


« Reply #17 on: July 29, 2017, 05:25:24 pm »

Baltimore Ed,

I have good news ...... and ...... not so good news.  First, the "not so good."  Unless Uberti has done a major change in the way their 1866 Ladle is made ...... it is KRAP.  It is too shallow in comparison to an original, and uses a bent tab as a cartridge stop.  The bent tab WILL break.  Not if .... when.  500 rounds .. 5 rounds .. just be assured, it will break.  It needs replaced "BEFORE" the rifle goes into service.

Now "The Good!!"  There are very nice replacements available.  VTI Gunparts has a nice deep scoop Ladle that is much better made than the OEM ladle.  Made of much sterner stuff.  Personally, I would still re-inforce the KRAP little tab.  Track of the Wolf also sells nice after-market ladles.  I believe the same Mfgr makes labels for both retailers.

There is much less stress on the KRAP little tab in a 44-40 rifle.  The ladle scoop is the primary cartridge stop.  The heaviest breakage occurs in 38s

Coffinmaker
Logged
Baltimore Ed
Top Active Citizen
*
Offline Offline

Posts: 494



« Reply #18 on: July 29, 2017, 07:17:01 pm »

I see on the sass forum/utube where jb weld is used ( which fixed my Marlin jam 100%) but I also see where a piece of steel can be soldered to the ladle. Sounds more permanent. If I've got to reinforce whatever aftermarket ladle let me ask.  Are there any drawings of the dimensions of this reinforcement piece? How big does it need to be? Can a triangle work or would a rectangular shape be better? Someone mentioned using a woodruff key. After 1300.00 I shouldn't have to tinker with anything on a new Uberti but I've read this bitch numerous times in my researching this so I'll hush. After all this is cowboy action but unfortunately a part of that 'action' is the act of repairing our NIB firearms in order to play cas with them. I digress. What does this tab extension have to clear?  And thanks alot for the good-bad news. Glad you're not my brain surgeon.
Logged

"Give'em hell, Pike"
Major 2
"Still running against the wind"
Deputy Marshal
Top Active Citizen
*
Offline Offline

Posts: 10288


Cracker Cow Cavalry


« Reply #19 on: July 30, 2017, 04:56:51 am »

My 2 cents

My Pard bought a Brand spank'n' new in box 38 Cal. 66 from Taylors in 2012 ..." slam dam spanking new "
On the second stage of his very first outing it jammed ...Lever would only open about 3/4 inch as well...

removing the side plate these two parts pieces ? fell out ....  at the time it was  Huh  WTH

 the tab was broken off the ladle  and we surmised  the piece of steel had been soldered to the ladle and failed .
There a minute of solder on the rectangular piece of steel & a spot on the ladle.... (assume this was done at Taylors before it was shipped )
NO clue what the little tab of brass is .... We did not find the ladle tab ( blued steel )

we installed the Track of the Wolf replacement ....  5 years later no issues







* 20170211_115339_HDR_resized.jpg (186.56 KB, 1328x747 - viewed 51 times.)
Logged
Coffinmaker
Top Active Citizen
*
Offline Offline

Posts: 4259


« Reply #20 on: July 30, 2017, 11:56:15 am »

Baltimore Ed ....

There are several ways to resolve this issue.  First method is to procure one of the new After-Market ladles from either VTI or TOW and install it.  Cross your fingers.  I have heard of Them lasting indefinitely.  Especially with large bore calibers (44-40 & 45)

Reinforcement may be a rectangle, a triangle, a piece of rod stock .. what have you.  The key here is flux and clean surfaces to solder to.  the same conditions apply should you opt for J. B. Weld.  I have a '66 with a gusset formed from JB weld that has ben in service for at least 7 years.  MUST have clean surfaces to glue to .. MUST mix the JB CORRECTLY.  Must hold one's tongue right in any case  Grin

Clean the back of the Ladle where you going to solder too or Glue too.  Right down to bare steel.  Then clean it again with alcohol.  I make a "dam" on either side of the tab with masking tape then fill with JB Weld then set it on an angle overnight to cure.  Don't touch it.  Don't even breathe on it.  Leave it alone overnight.  When you remove the cool little tape dam(s) you'll have a nifty little gusset.  Done right, it will last indefinitely.  The ladle is the only weakness in the 1866.  The only other problem you will encounter are the OEM Springs but you already know that.  Substitute some nice after-market springs.  Enjoy.  Brass rifles-r-FUN.

coffinmaker
Logged
Baltimore Ed
Top Active Citizen
*
Offline Offline

Posts: 494



« Reply #21 on: July 30, 2017, 12:09:19 pm »

Coffinmaker, thanks for the instructions. I'll post photos of whatever I do. As soon as I can find out what the serial number is I wil order a 25.00 loading gate from track of the wolf. I'll still reinforce the original one.
Update--- another week and no musket. After waiting for 4-5 months and not even thinking about the rifle, now with it supposedly sitting in a warehouse in VA or on a ups truck somewhere I'm getting anxious.
Update 8-11-17--Still waiting, shipping delay. The 1st shipment is in VA awaiting unpacking and log in. The second and last shipment of this years 1866 run is due in next Tuesday. We'll see what happens next week. Stay tuned for further developments. Meanwhile back at the farm.......
Update 8-16-17-- Just talked to Keri in VA. Doesn't look like there were any muskets in either shipment. There was supposed to be one. So sad. Uberti won't be open again until September 1st. She's supposed to call me back later today to confirm. I'll just have to complete my Spanish Contract musket. Meanwhile back at the other farm.....
Logged

"Give'em hell, Pike"
Baltimore Ed
Top Active Citizen
*
Offline Offline

Posts: 494



« Reply #22 on: August 17, 2017, 09:21:09 am »

At the other farm....Just got off the phone with the Taylors rep, Keri. Bad news. My musket is STILL IN ITALY. Either it wasn't completed to make either of these 2 recent shipments to VA or there was some problem with the order or Uberti hasn't even started the build yet. Take your pick. In all honesty, Keri was very apologetic and after September 1st when Uberti is back to work, will try to find out what happened to my musket. Stay tuned for further developments---same bat time--- same bat channel.
Update---9-12. Talked to Keri yesterday. Still no information from Uberti in Italy.
Update---10-16 Called Keri , still doesn't know anything.
Update---10-31 Happy Spooky Day! I got a call from my pawn shop. Keri HAS a musket in and is shipping tomorrow!! Should be here by Friday or Saturday. Can't wait.
Update---11-5 musket is at my FFL guys shop. Looks like I can't go get it until Tuesday. Dadgummit!!!! As soon as I pick it up I will post photos.
Logged

"Give'em hell, Pike"
Baltimore Ed
Top Active Citizen
*
Offline Offline

Posts: 494



« Reply #23 on: November 07, 2017, 02:00:30 pm »

Guys, my 1866 musket has finally arrived and looks great. I put 5 rds through it and the sights are dead on. BUT, I had to load them one at a time. They would go into the lifter through the gate but I couldn't get any rds to go into the magazine!! I'm not going to tear it down now but will tinker with it tomorrow. I've got a set of Slick Springs with hardened screws to replace the factory stuff with and after I see what size screw is in the ladle I will order a upgraded gate from track of the wolf.  Photos tomorrow.
MT, as to our bayonets, not good news, the 1873 is too tight on the bbl and the front sight is too tall to go under the bridge of the trapdoor bayonet. We might be able to stretch the bridges. I would do that before I shortened the ft sight.
Logged

"Give'em hell, Pike"
treebeard
Top Active Citizen
*
Offline Offline

Posts: 284



« Reply #24 on: November 07, 2017, 08:38:19 pm »

Looking forward to the pictures!! Also interested on what you discover on that problem.
Logged
Pages: [1] 2 Go Up Print 
Cas City Forum Hall & CAS-L  |  Special Interests - Groups & Societies  |  1860 Henry (Moderators: Flint, Major 2)  |  Topic: Taylor's & Co. Win 1866 "Musket" .44-40 on Special Order List... « previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.076 seconds with 22 queries.