Need some Uberti Cattleman dimensions please?

[Capt Quirk]

I've been asked to make a holster for an Uberti Cattleman in .45LC. Unfortunately, this dummy got the wrong dummy gun. His pistol has a 5 1/2" barrel, I got the 7". To make things even shakier, I'm not sure if it is truly a .45LC.

Could somebody give me the length of the cylinder, and the length of the ejector rod, measured as if you were measuring the barrel?

Many thanks in advance.

[Abilene]

The caliber doesn't matter to the dimensions.  All calibers are the same dimensions on the outside (just different sized holes in them).  The ejector rod is the same on the 4 3/4", 5 1/2", and 7 1/2" barrels. 

[Capt Quirk]

Well, the width of the cylinder is only slightly important, but the length of the cylinder will make a difference when I'm making the pattern and molding the holster. If my dummy is for short rounds, then it throws off the fit. But thanks for the info on the ejector. If it is too long or too short when making the holster, that would also affect the final fit. I like my holsters to fit like a glove when possible, not too tight, not too loose. So, thank you.

[Advertising]

[Abilene]

All the dimensions are the same.  Cylinder as well.

[Scattered Thumbs]

And the ejector rod is 4 3/4 for all.

[Capt Quirk]

Thanks for all your help! When I have a finished holster, you know I'll post pics