Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 23, 2017, 06:08:01 am

Login with username, password and session length

Search:     Advanced search
* Home FlashChat Help Calendar Login Register
Currently there are 0 Users in the Cas City Chat Rooms!
Cas City Forum Hall & CAS-L  |  CAS TOPICS  |  1911 & Wild Bunch Shooting (Moderators: Jefro, August)  |  Topic: 1911 Magazine Release 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: 1911 Magazine Release  (Read 2592 times)
Two-Bits
Citizen
*
Offline Offline

Posts: 23



« on: May 17, 2015, 10:14:05 pm »


This 1911 is a R!A GI model.  I would like to replace the spring inside the magazine release button and have 2 questions.

1.  Do I need to do a complete tear down to get to the release button out?  
2.  Has anyone done it?

Thanks!
Logged

_______
Two-Bits
St. George
Deputy Marshal
Top Active Citizen
*
Offline Offline

Posts: 4510


NCOWS , GAF, B.O.L.D., Order of St. George, SOCOM,


« Reply #1 on: May 17, 2015, 11:48:26 pm »

No - not at all...

Just remove the magazine and clear the piece.

Then, get an appropriately-sized small screwdriver.

Now, depress the magazine button completely to the frame - insert the screwdriver into the screw slot of the lock and turn.

That will cause the spring to compress and become locked.

Remove the assembly, use the screwdriver to turn the lock and release the spring - then change the spring.

Reassemble in reverse order.

I don't know why you'd think you need to change that spring - they almost never break - but if you're going for a faster magazine drop for speed, you're making the piece less safe.

Scouts Out!
Logged

"It Wasn't Cowboys and Ponies - It Was Horses and Men.
It Wasn't Schoolboys and Ladies - It Was Cowtowns and Sin..."
Two-Bits
Citizen
*
Offline Offline

Posts: 23



« Reply #2 on: May 18, 2015, 12:14:05 am »

St. George:
Thanks.  If it makes it less safe, then I won't do it.  The reason why I thought about replacing it was it seems like the spring in there is real stiff and because I have small hands, its hard for me to reach that button and depress it easily.  I almost have to turn the gun 90 degrees to get enough pressure on that button to release the mag.  I thought maybe a lighter spring would help.
Logged

_______
Two-Bits
Thumb Buster
Top Active Citizen
*
Offline Offline

Posts: 163



« Reply #3 on: May 18, 2015, 08:57:38 am »

One thing I noticed about my RIA 1911 is that the magazine release was dry when I first removed it.   There was also residue in the frame and on the body of the release much like what was in the firing pin tunnel and the extractor tunnel.  Putting just a very small amount of lube on the release has made it easier.  Hope that helps.   
Logged

"Those who pound their guns into plowshears will plow for those who didn't"  --Thomas Jefferson
St. George
Deputy Marshal
Top Active Citizen
*
Offline Offline

Posts: 4510


NCOWS , GAF, B.O.L.D., Order of St. George, SOCOM,


« Reply #4 on: May 18, 2015, 10:52:51 am »

It's 'supposed' to be stiff.

That's so it holds a fully-loaded magazine securely for a soldier's weapon as he runs, jumps, crawls, makes parachute landings, kicks in doors, and any other highly physical activity that a combat soldier engages in, because iff it retains the magazine, the soldier still has a viable sidearm to depend on until he can find an undamaged long gun.

It was designed to be a weapon - not for comfort in a game.

That said - lube it, as has been suggested - it might help - but what 'will' help will be more range practice, and more dry-firing time - getting used to 'that' piece in 'your' shooting hand.

Scouts Out!
Logged

"It Wasn't Cowboys and Ponies - It Was Horses and Men.
It Wasn't Schoolboys and Ladies - It Was Cowtowns and Sin..."
Blackfoot
Top Active Citizen
*
Offline Offline

Posts: 146


« Reply #5 on: May 19, 2015, 09:02:16 am »

You don't want it to be too easy to release.  If the spring is too light you might find your magazine on the ground when you think it is in the gun. Embarrassed

Blackfoot
Logged
August
Deputy Marshal
Top Active Citizen
*
Offline Offline

Posts: 534


« Reply #6 on: May 19, 2015, 09:49:58 am »

Brownells sells a five-spring, lightened mag release pack.  Number five in the pack is "stock" and they go down from there to very light.

With a standard height release button, I've found even the lightest spring will secure the magazine.  But, I've found #2 and #3 to be more to my liking.

The lightened springs make a real difference in simplifying the operation of the  magazine release while on the clock.  

The five spring pack is reasonably priced and it a great way for you to find out for yourself what weight works for you.  Mag release springs are very easy to change, once you get the feel of the bayonet catch on your particular gun.  Take the opportunity of the disassembly to smooth the bearing surfaces of the catch.
Logged
Pages: [1] Go Up Print 
Cas City Forum Hall & CAS-L  |  CAS TOPICS  |  1911 & Wild Bunch Shooting (Moderators: Jefro, August)  |  Topic: 1911 Magazine Release « previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.054 seconds with 22 queries.